Machine type
Pull-type disc mower conditioner / discbine
John Deere mower ยท 2010s to present
John Deere 630 Mower Conditioner
John Deere 630 Mower Conditioner is a pull-type disc mower conditioner, commonly called a discbine, with a 2.7 m 23 cm. cutting width. It cuts hay with a six-disc cutterbar and conditions the crop into an adjustable windrow for faster drydown.
Cutting width
2.7 m 23 cm.
Power required
65 to 150 hp, depending on PTO configuration
Production years
2010s to present
John Deere 630 Mower Conditioner specifications
| Machine type | Pull-type disc mower conditioner / discbine |
|---|---|
| Cutting width | 2.7 m 23 cm. |
| Power required | 65 to 150 hp, depending on PTO configuration |
| Production years | 2010s to present |
| Cutting system | Gear-driven rotary disc cutterbar |
| Conditioning type | V-tine impeller or urethane roll conditioner |
| Number of discs | 6 |
| PTO speed | 540 or 1,000 rpm |
| Approx. weight | About 2,130 kg with impeller, about 2,225 kg with urethane rolls |
What the 630 Mower Conditioner is used for
The 630 is used to cut hay crops and lay them into a controlled swath or windrow. Its conditioner scuffs or crimps stems to help the crop dry more evenly before raking and baling. It is suited to farms that need a pull-type mower conditioner with a roughly 10-foot cut.
Why the John Deere 630 Mower Conditioner stands out
The low-profile modular cutterbar uses six gear-driven discs and has adjustable cutting height. Impeller and roll conditioning choices let the operator match conditioning intensity to crop type. A slip-clutch or overrunning-clutch arrangement helps protect the driveline and cutterbar from shock loads.
Buying a used John Deere 630 Mower Conditioner
Inspect each cutterbar module for leaks, bearing noise, damaged discs, and loose or worn knives. Check the impeller tines or conditioner rolls, belts, gearbox oil, PTO shaft, and clutch operation. Examine the hitch, transport lock, skid shoes, and hydraulic hoses for wear or damage.
John Deere 630 Mower Conditioner frequently asked questions
What PTO speed can run a John Deere 630?
It was available for 540- or 1,000-rpm PTO operation, so confirm the machine's driveline setup before purchase.
How wide does the 630 cut?
Its cutterbar cuts 2.7 m 23 cm.
Does the 630 use rolls or tines to condition hay?
It could be equipped with either a V-tine impeller conditioner or urethane conditioning rolls.
Specifications are commonly cited figures for general reference; exact figures vary by model and configuration, so confirm against the manufacturer's records. Cutting widths, heights and weights are converted to metric and rounded. Match the mower to your tractor's power and PTO. Page updated 19 Sep 2026.