Tillage type
Field cultivator, secondary tillage
John Deere tillage ยท Mid-2000s to 2010s
John Deere 2210 Field Cultivator
John Deere 2210 Field Cultivator is a pull-type secondary-tillage field cultivator built for seedbed preparation and shallow weed control. Typical configurations cover about 7 to 11.7 m and use closely spaced sweep shanks to level worked ground after primary tillage.
Working width
About 7 to 11.7 m
Working depth
Typically 5 to 15 cm.
Production years
Mid-2000s to 2010s
John Deere 2210 Field Cultivator specifications
| Tillage type | Field cultivator, secondary tillage |
|---|---|
| Working width | About 7 to 11.7 m |
| Working depth | Typically 5 to 15 cm. |
| Production years | Mid-2000s to 2010s |
| Blade/shank spacing | Typically 15 cm. shank spacing |
| Frame type | Pull-type, folding-frame configurations |
| Horsepower required | Typically 7 to 10 hp per ft |
| Approx. weight | About 3,175-6,805 kg, depending on width and attachments |
What the 2210 Field Cultivator is used for
The 2210 is generally used for secondary tillage ahead of planting. Sweeps loosen and mix the upper soil layer, while rear harrows or rolling finishers break clods and level the surface. It is suited to maintaining a relatively shallow, uniform seedbed rather than deep primary tillage.
Why the John Deere 2210 Field Cultivator stands out
The split-row shank arrangement gives broad sweep coverage across the tool width. Folding wings and rear finishing attachments let larger versions cover ground efficiently while leaving a more level surface.
Buying a used John Deere 2210 Field Cultivator
Inspect sweeps, standards, shank pivots, and mounting hardware for wear or repairs. Check wing hinges, fold cylinders, hydraulic hoses, wheel bearings, and the condition of any harrow or rolling finisher. Look closely for frame cracks around the hitch, main beam, and wing pivots.
John Deere 2210 Field Cultivator frequently asked questions
What is the John Deere 2210 used for?
It is primarily a secondary-tillage tool for shallow soil conditioning, weed uprooting, and seedbed preparation.
How much tractor power does a 2210 need?
A common guideline is about 7 to 10 hp per foot, with actual need varying by depth, soil, and finishing attachment.
Can a 2210 replace a disk ripper?
No. Its sweep shanks are intended for shallow field cultivation, not the deep fracture work of a disk ripper.
Specifications are commonly cited figures for general reference; exact figures vary by model, configuration and setup, so confirm against the manufacturer's records. Working widths, depths and weights are converted to metric and rounded. Match the implement to your tractor's power and your soil type. Page updated 19 Sep 2026.